Step 1: Preparing the Installation

Take a moment to inspect the Microfiber Leather Steering Wheel Cover after removing it from the packaging. Identify the side and bottom pieces that correspond to the specific spots on your Mazda’s steering wheel. Ensure proper alignment before proceeding to the next step.

Step 2: Tucking the Extra Material

Utilize the accompanying tucking tool provided with the steering wheel cover kit. Starting at 3:00, 6:00, and 9:00 positions (right, bottom, and left-side respectively), begin tucking the excess material under the wheel trim. This step not only ensures a snug fit but also contributes to a professional and seamless appearance.

Step 3: Stitching the Cover Together

After completing the tucking process, it’s time to secure the cover by stitching it together. To maintain an even and aesthetically pleasing stitch, measure out 3 to 4 times the distance you are about to stitch using the provided spool of string. Cut it at the measured point, thread the needle, and secure it with a knot.

Commence stitching at the bottom of the back of the wheel. Push the needle through the back side of the cover to the front side, passing it through the raised stitch on the opposite side. Continue this process for the entire length of the section, going back and forth. Be mindful not to pull the cover excessively during the stitching process to prevent wrinkles.

Step 4: Repeat Stitching for Remaining Sections

Apply the same stitching technique for the remaining two sections of the steering wheel. Consistency in your stitching pattern ensures a uniform and professional look across the entire wheel.

Step 5: Final Adjustments

Inspect the installed cover, and if any edges are slightly out of place, utilize the small pieces of provided double-sided tape. Gently secure any loose edges to ensure a polished and neat finish.

Step 6: Enjoy the Drive

With the installation complete, take a moment to appreciate the enhanced aesthetic and comfort of your Mazda’s steering wheel. You’re now ready to enjoy a drive with your stylish and personalized Microfiber Leather Steering Wheel Cover.

Following these detailed steps ensures a meticulous installation, guaranteeing both functionality and an attractive appearance for your Mazda’s steering wheel cover.

Purchase this cover below: