Step 1: Gather Tools and Components

Ensure you have all the necessary tools and components from the ANFOKAS package, including the 8pcs of door handle cover trims, adhesive tape, and any additional accessories or instructions provided.

Step 2: Clean the Door Handles

Thoroughly clean the existing door handles on your Mazda vehicle. Use a mild soapy solution and a clean cloth to remove any dirt, grease, or residue. This step is crucial for proper adhesion of the new door handle covers.

Step 3: Position the Door Handle Covers

Identify the correct door handle covers for each door on your Mazda model. Carefully position each cover over the corresponding door handle, ensuring that the smart entry holes align correctly.

Step 4: Peel Off the Adhesive Backing

On the back of each door handle cover, you’ll find adhesive backing. Gently peel off the protective film from the adhesive side, exposing the sticky surface.

Step 5: Align and Press

Align the door handle cover precisely over the door handle, making sure the smart entry holes match up. Once aligned, firmly press the cover onto the door handle to secure it in place. Apply even pressure across the entire surface to ensure a strong bond.

Step 6: Repeat for All Door Handles

Repeat the process for all four doors, applying the door handle covers one by one. Take your time to align each cover correctly before pressing it onto the door handle.

Step 7: Secure Smart Entry Holes

If your Mazda vehicle is equipped with smart entry, make sure the smart entry holes on the covers are securely in place. They should fit seamlessly around the smart entry sensors.

Step 8: Final Adjustments

After installing all the door handle covers, step back and visually inspect each one. Make any necessary adjustments to ensure that all the covers are aligned symmetrically and securely attached.

Step 9: Allow Adhesive to Set

Give the adhesive some time to set and bond with the door handles. It’s recommended to avoid opening and closing the doors excessively for a certain period as the adhesive cures.

Step 10: Enjoy the Sporty Upgrade

Once the adhesive has fully set, you’re ready to enjoy the sporty and stylish exterior upgrade to your Mazda. The gloss black door handle covers should enhance the overall aesthetics of your vehicle.

Following these steps carefully will help you achieve a professional and secure installation of the ANFOKAS Car Exterior Door Handle Cover Trims on your Mazda.